Universal?! That's right. When all else fails, as long as you have an existing projector, these should be able to be fitted in their place. The Morimoto Retro-Quik system uses laser cut brackets made of sturdy G10 fiberglass to adapt high-performance projectors in place of inferior existing units. Just trace the existing projector's shape and mounting pattern to the center of the Universal Retro-Quik plate, trim it down, and bolt it all up!
Front or Back? Two options maximize possibilities. You can either mount the RetroQuik plate shield slightly in front of the center of the projector (front option), or slightly recessed behind the center (back option). Not sure which? Front plates are a safe choice for most installs.
Morimoto Mini H1 7.0 Projectors: The ultra-wide-output Mini H1 7.0 projectors include clear lenses for the best performance possible, as well as a Bi-Xenon function to replace or supplement your stock halogen high beams.
Morimoto XB Ballasts: Feature relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up giving them a failure rate of less than .02%!
Morimoto XB H1 Bulbs: At the heart of the XB H1 bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Morimoto Relay Harnesses: Have fulled-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.
Accessorize: The optional Retro-Rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the right rings for your shrouds.
2x Projectors: Morimoto Mini H1 7.0
HID Ballasts: Morimoto XB35 or XB55 AMP